Sonifex AVN-MPPR 4 Channel Presenter Remote Controller

The Sonifex AVN-MPPR 4 Channel Presenter Remote Controller is a great tool for on-air presenters and Sound Control Room operators. Presenters can easily adjust audio levels sent to their radio or wired IEM systems. At the same time, operators can remotely adjust these levels. It connects on a common Ravenna Audio over IP (AoIP) network, with audio sources from Ravenna-based AoIP mixers or input portals. Setup and control are available via webpages and 3rd party apps. It uses mono audio throughout. Key Features: - 4 rotary encoders to control 4 channels of a selected virtual mixer. - 1 XLR and 3.5mm headphone outputs. - Software-configurable output level control for each headphone output to set signal attenuation. - IP address reset. - Can be mounted on a standard microphone screw thread or under a desktop with optional accessories. Technical Specifications: - PoE Power: Standard 802.3at Type 1, Class 3. - PD Power Range: 6.49 W to 12.95 W. - Typical PSE Power Usage: 14 W. - Max PSE Power Usage: 15.4 W. - Physical: Dimensions (Raw) 20cm (W) x 15cm (D) x 4.2 (H) (1U) or 7.9' (W) x 5.9' (D) x 1.7' (H) (1U); Dimensions (Boxed) 28cm (W) x 19cm(D) x 9cm(H) or 11' (W) x 7.5(D) x 3.5(H). Weight - Nett: 0.6kg, Gross: 1.13kg; Nett: 1.3lbs, Gross: 2.45lbs.

Using the Sonifex AVN-MPPR 4 Channel Presenter Remote Controller is quite simple. First, connect it to the common Ravenna Audio over IP (AoIP) network. Then, you can use the 4 rotary encoders to control the 4 channels of the selected virtual mixer. For presenters, just adjust the audio levels according to your needs. Operators can use webpages or 3rd party apps to remotely adjust the levels. When using the headphone outputs, you can configure the output level control through software to set the signal attenuation. Also, you can reset the IP address if necessary. As for mounting, you can use optional accessories to mount it on a standard microphone screw thread or under a desktop. Some important notes: Make sure the power supply meets the technical specifications. Avoid using it in a humid or dusty environment. For maintenance, keep it clean and dry. If there are any problems, contact the manufacturer for support.