Lowell ACSP-1502-VTE Compact Surge Suppressor-15A, 2 Outlets, Over/Under Protection, Detachable Cord

The Lowell ACSP-1502-VTE is an advanced surge protector in a stand - alone chassis. It safeguards sensitive electronics from power surges up to 72,000A. With over/under voltage protection, it shuts off the outlets when the line voltage drops below 100V or rises above 140V. This 15A single - circuit surge suppressor has two single outlets. It's ETL Listed and meets UL1449 - 3, ANSI C62.41 standards, protecting line to neutral without ground wire contamination. It can protect electronic equipment from transient voltages, spikes and surges with a response time of less than 5 nanoseconds. It features a 6 - ft. detachable IEC cord with a NEMA 5 - 15P plug, front LEDs for visual system status, and universal mounting brackets for versatile installation. The patented plate with outlets can rotate 90 degrees for front or side access, and it comes with a 10 - year warranty.

Using the Lowell ACSP - 1502 - VTE surge protector is easy. First, connect the 6 - ft. detachable IEC cord with the NEMA 5 - 15P plug to a power source. Then, plug your sensitive electronics into the two 15A NEMA outlets. You can use the universal mounting brackets to install it on a surface or rear rack as you like. The front LEDs will show you the system status at a glance. When it comes to safety, don't worry. The over/under voltage protection will turn off the outlets if the voltage goes out of the safe range (below 100V or above 140V). As for maintenance, keep it clean and dry. Check the LEDs regularly to make sure it's working properly. If you notice any problems, refer to the 10 - year warranty for support.