The Linebacker Extra Heavy Duty 3 Channel Cable Protector safeguards valuable electrical cables, cords, and hose lines from damage. It offers a safe passage for both vehicles and pedestrians. Ideal for industrial settings like construction sites with heavy truck and forklift traffic, it provides the extra - heavy protection needed. We also have ADA - compliant cable covers and bridges to match. This protector can handle cables and lines with an outside diameter up to 2.25 inches. It has a load capacity of 14,210 lbs per tire (28,240 lbs per axle). Made of all - weather polyurethane, it can bear heavy loads. The hinged lid allows easy placement and removal of cables. Its patented 5 - bar tread surface maximizes traction. The heavy - duty T - shaped connector interlocks modular sections. It's lightweight, easy to transport, set up, disassemble, and store, with a conveniently recessed carrying handle on the underside. Safety warning symbols are molded into the lid surface, and end caps provide a gradual taper to the ground or floor. It offers 45° left and right hand turns for more configuration options and can create a jog by joining turns. Moreover, it helps meet the 2008 National Electrical Code requirements (Article 525) to reduce the tripping hazard of electrical cables at events like carnivals and fairs. Dimensions: Length 36 in. (914.4 mm), Width 20 in. (508 mm), Height 3.05 in. (77.5 mm), Channel Width 2.25 in. (57.2 mm), Channel Height 2.25 in. (57.2 mm).
Using this cable protector is easy. First, decide on the layout based on where your cables are and the traffic flow. You can use the 45° left and right hand turns to create different configurations, even a jog. Open the hinged lid and place your cables or hose lines inside the channels. Make sure they fit well as it can handle up to 2.25 - inch diameter items. Then close the lid. When you need to move or re - arrange, the lightweight design and the recessed carrying handle make it simple to transport. You can also easily disassemble and store it. Remember, this protector has a high load capacity, but don't exceed 14,210 lbs per tire or 28,240 lbs per axle. Keep an eye on the safety warning symbols on the lid. For maintenance, since it's made of all - weather polyurethane, it can withstand different conditions. But if it gets dirty, just clean it with mild soap and water. Also, check the T - shaped connectors regularly to ensure they're interlocking properly.
