Product Description
The Lowell ACSP-2002-RPC is an advanced compact surge suppressor. It comes in a stand - alone chassis and offers top - notch protection for sensitive electronics against power surges up to 72,000A. This 20A single - circuit suppressor has two outlets and is ETL Listed, conforming to UL1449 - 3. It meets ANSI C62.41 standards and safeguards line - to - neutral connections without ground wire contamination. With a response time of less than 5 nanoseconds, it can effectively protect electronic equipment from transient voltages, spikes, and surges. The suppressor can be surface or rear rack - mounted using mounting brackets. The outlets are on a plate that can rotate 90 degrees for easy front or side access. LEDs provide visual ground verification and surge diagnostics. It also has the ability for remote power control via a low - voltage sequencer, switch, or control system with a maintained dry contact closure. Key features include suppression of line - to - neutral without ground contamination, TCR technology that can handle up to 72,000 amps, a chassis sized 1.75 in. x 6 in. x 9 in., two 20A NEMA outlets with a patented 90 - degree rotating plate, front LEDs for system status, universal mounting brackets for flexible installation, a 6 - ft. attached cord with a NEMA 5 - 20P plug, a 10 - year warranty, and remote power control capability.
Using the Lowell ACSP - 2002 - RPC is easy. First, decide where you want to install it. You can use the universal mounting brackets to mount it on a surface or the rear of a rack. Plug the 6 - ft. attached cord with the NEMA 5 - 20P plug into a power source. Then, plug your sensitive electronic devices into the two 20A NEMA outlets. You can rotate the outlet plate 90 degrees to access them from the front or side as per your convenience. The front LEDs will show you the system status. For remote power control, connect it to a low - voltage sequencer, switch, or control system that provides a maintained dry contact closure. When it comes to maintenance, keep it clean and free from dust. Check the LEDs regularly to make sure the surge protection is working properly. Remember, this suppressor has a 10 - year warranty, but avoid exposing it to extreme conditions like very high humidity or temperatures. If you notice any issues with the LEDs or the performance, it's a good idea to have it checked by a professional.
