TOA Electronics IP-A1PC580R 8-Watt PoE-Powered Ceiling Speaker

The TOA Electronics IP-A1PC580R is an outstanding PoE-powered ceiling speaker. It comes with a built-in 8W amplifier and can store up to 20 audio files internally. This speaker supports the SIP protocol, allowing for easy integration with VoIP devices. With 20 multicast ports, it's perfect for group paging. It can also receive broadcasts from a Video Management System via the ONVIF audio backchannel. You can control the device and integrate it into your system through a remote API (HTTP) or local control inputs. **Key Features** - 20cm (8”) dual cone-type speaker with a sturdy metal construction. - Receives SIP audio, ONVIF Audio Backchannel, and Multicast. - Enables local broadcast using internal audio files. - Has 1 audio input (LINE/MIC selectable, with phantom power On/Off). - Features an 8W built-in amplifier and 1 LINE audio output. - Comes with 2 control inputs and 1 control output. - Supports HTTP commands (receive). - Can store audio files (20 files, total 80MB, WAV/MP3). - Offers playback programs (Repeat, Weekly Timer). - Is PoE powered for convenient installation. **Technical Specifications** - **Power Source**: PoE (IEEE802.3af Class 3) - **Power Consumption**: 12.95 W (rated output), 5 W (IEC62368-1) - **Amplifier Rated Output**: 8 W - **Sensitivity**: 97 dB (1 W,1 m) - **Maximum Sound Pressure Level**: 106 dB (8 W,1 m) - **Frequency Response**: 50 Hz - 16.5 kHz - **Speaker Component**: 20 cm (8”) Dual cone-type - **Audio Codec**: PCMU (G.711u), PCMA (G.711a), G.722 - **Broadcasting Modes**: SIP Broadcasting/SIP calling Mode (PCMU/PCMA/G.722, P2P/SIP Server Connection), Multicast Broadcasting Mode (PCMU/PCMA/G.722 Auto codec recognition, 20 ports), VMS Broadcasting Mode (ONVIF Audio Backchannel, PCMU), Internal Message Broadcasting Mode. You can set priorities for each mode. - **Internal Messages**: Max. 20 messages (Max. recording capacity: 80 MB) - **Supported file formats**: WAV file (8/16/44.1/48 kHz sampling frequency, 8/16 bit, monaural/stereo), MP3 file (32/44.1/48 kHz sampling frequency, 64 - 320 kbps, CBR/VBR, monaural/stereo) - **Repeat playback**: You can set playcount (1 - 10 times), duration (5 - 3600 sec), or use a timer (from start time to end time). - **Interval time**: 0 - 60 sec, Delay time: 0 - 30 sec - **Trigger**: Control Input or Remote API (HTTP) - **Network I/F**: 100BASE-TX, Auto MDI/MDI-X, RJ45 connector - **Network Protocol**: TCP/IP, UDP, HTTP, RTP, RTSP, RTCP, ARP, ICMP, IGMPv3, NTP, SIP(RFC3261) - **Audio Input**: 1 channel, electronically-balanced, 10 kΩ LINE/MIC selectable (Rated input: LINE: 0 dB, MIC: -60 dB), PAD function (-20 dB), Phantom power ON/OFF (12 V DC), volume adjustable removable terminal block (6 pins) - **Audio Output**: 1 channel, electronically-balanced, 600 Ω or less, Rated output: 0 dB, removable terminal block (6 pins) - **Control Input**: 2 channels, no-voltage make contact inputs, open voltage: 5 V DC, short-circuit current: 2 mA or less, removable terminal block (6 pins) - **Control Output**: 1 channel, open collector output, withstand voltage: 30 V DC, control current: 10 mA or less, removable terminal block (6 pins) - **Indicator**: STATUS (green/blue/orange/red), LINE/MIC IN (green/red), OUTPUT (green), LINK/ACT (green) - **Clock Accuracy**: ±13 seconds per month - **Time Adjustment**: Manual time setting, Time adjustment by NTP server - **Power Outage Protection Period**: 24 hours (RTC time retention, at 40 Degrees C (104 Degrees F)) - **Dimensions for Fixing Hole**: Mounting hole: Φ228.6 mm (9”) - **Speaker Mounting Method**: Screw in type - **Operating Temperature**: 0 Degrees C to +50 Degrees C (32 Degrees F to 122 Degrees F) - **Operating Humidity**: 90 %RH or less (no condensation) - **Finish Frame**: Steel plate, white (RAL 9016 equivalent), paint - **Grill**: Steel net, white (RAL 9016 equivalent), paint - **Dimensions**: 324 x 111 (D) mm (12.76” x 4.37”) - **Weight**: 1.8 kg (3.97 lb.) - **Accessory**: Pattern paper...1, Removable terminal plug (6 pins, preinstalled on the unit)...2, Mounting screw (5 x 38)...4

Using the TOA Electronics IP-A1PC580R ceiling speaker is quite straightforward. First, install it on the ceiling using the provided mounting screws. Connect it to your network via the RJ45 connector. You can power it through PoE, which is very convenient. When it comes to playing audio, you can either use the internal audio files stored in the speaker or receive audio from other sources like SIP devices or a Video Management System. If you want to play internal files, you can set up playback programs such as repeating the files a certain number of times or using a weekly timer. For audio input, you can choose between LINE and MIC, and adjust the volume as needed. You can also turn the phantom power on or off according to your requirements. Here are some important notes. Make sure the operating temperature is between 0°C and 50°C and the humidity is 90%RH or less to avoid any damage. When handling the speaker, be gentle with the removable terminal blocks. For maintenance, keep the speaker clean by gently wiping it with a soft cloth. Check the connections regularly to ensure they are secure. If there is a power outage, the speaker can retain the RTC time for 24 hours at 40°C, but it's a good idea to have a stable power supply to avoid any disruptions.