Product Description
The Chief PAC525P2-KIT is an outstanding power retrofit kit with two NEMA 5-15R outlets, designed for Chief PAC525 in-wall boxes. It offers high-performance protection, featuring isolated ground, non-sacrificial multi-stage filtration, and surge protection. This kit safeguards your equipment from disruptive high-frequency noise and damage caused by power disturbances. It's compatible with multiple in-wall box models like PAC525, PAC525F, and more. Key features include non-volatile spike protection with an LED power indicator, non-sacrificial multi-stage technology, and a non-current limiting design. It can improve the reliability and functionality of your connected equipment by protecting it from high-energy transients, lightning strikes, and electronic noise. The line filter reduces common and differential mode noise by up to 40 dB. Rated for 125 VAC, 60 Hz, 15 A, with a 1875-watt maximum. It also has a ferrite toroid based EMI Filter and can withstand 240 VAC continuously without damage or loss of protection. Technical details: UL Listed, black in color, with a duplex NEMA 5-15R isolated ground receptacle and a green LED status indicator. Overall dimensions are 3.79 x 8.69 x 3.57 inches. It has a 622 Joule MOV energy rating, is a Type 3 Surge Protective Device (SPD), and consumes less than 0.5 W. Product weight is 2 lbs, shipping dimensions are 10.25 x 10.25 x 5.75 inches, shipping weight is 3 lbs, temperature range is 30 F to 104 F, and weight capacity is 10 lbs.
Using the Chief PAC525P2-KIT is easy. First, make sure your in-wall box is one of the compatible models like PAC525, PAC525F, etc. Then, install the kit in the box following the basic electrical installation procedures. Plug your devices into the two NEMA 5-15R outlets. The LED power indicator will show you if the power is on and the protection is working. When it comes to safety, always use it within the rated voltage of 125 VAC, 60 Hz, 15 A and the maximum wattage of 1875. Don't expose it to extreme temperatures outside the range of 30 F to 104 F. For maintenance, keep it clean and free from dust. If you notice any issues with the LED indicator or suspect a problem, it's a good idea to have it checked by a professional electrician. This way, you can ensure your equipment stays protected and the kit functions properly for a long time.
