Product Description
The Peavey RX 22N Neo High - Frequency Sound Driver is a top - notch audio component. It features a 2 - inch design, offering high - quality sound output. Key technical specs include a throat parameter of 0.875” (22 mm), a nominal impedance of 8 Ohms, and a minimum impedance of 5.2 Ohms. It has a power capacity that can handle 280 W peak, 140 W program, and 70 W continuous power from 1000 Hz to 20,000 Hz. With a sensitivity of 111 dB / 1W 1m on - axis on a 90º H x 45º V horn and a nominal efficiency of 30%, it delivers excellent performance. The frequency response ranges from 500 Hz to 20,000 Hz, and the recommended crossover is 1,200 Hz at 12 dB / Octave. The diaphragm is made of commercially pure titanium, and the voice coil has a diameter of 2.0” (50.8 mm) and is made of edge - wound copper - clad aluminum ribbon with a high - temp composite bobbin. It uses ferrofluid for voice coil cooling and has a flux density of 20,500 gauss (2T). The driver has dimensions of 3.858” (98 mm) diameter x 3.01” (76.4 mm) depth, with a horn coupling diameter of 7/8” (22.2 mm) and standard 1 3/8” - 18” threads. It weighs 2 lbs. 12 oz. net and 3 lbs. 11.5 oz. for shipping. The diaphragm kit number is 03617300, and the packed weight is 2.98 lb (1.35 kg), with packed width, height, and depth of 4.5” (11.43 cm), 4.725” (12.0015 cm), and 3.55” (9.017 cm) respectively.
Using the Peavey RX 22N Neo High - Frequency Sound Driver is easy. First, make sure to connect it properly to your audio system following the wiring instructions. When setting up the crossover, aim for the recommended 1,200 Hz at 12 dB / Octave, but you can go as low as 500 Hz if needed. For best results, use it with a pink noise band limited from 1000 Hz to 20 kHz. As for maintenance, keep it in a dry and clean place. Avoid exposing it to extreme temperatures or humidity. If you need to replace the diaphragm, use the diaphragm kit (03617300). When handling the driver, be gentle to prevent damage to the delicate components.
