Peavey DX 14 High Frequency Driver

The Peavey DX 14 High - Frequency Driver is an ideal direct replacement for the Peavey DM 112 and DM 115 enclosures. It offers high - performance audio with a wide frequency response from 1.0 Hz to 20,000 Hz. With a titanium diaphragm and a voice coil made of copper - clad aluminum wire on a high - temp Kapton bobbin, it ensures durability and great sound quality. The driver has a sensitivity of 103 dB / 1W 1m on - axis on a 90(deg) H x 40(deg) V horn, and a nominal efficiency of 28%. It can handle a power capacity of 140 W peak, 70 W program, and 35 W continuous using pink noise band - limited from 1000 Hz to 20 kHz. Technical details include a 1.35 / 34.3 mm voice coil diameter, a .962 / 24.4 mm throat parameter, a nominal impedance of 8 Ohms, and more. Its dimensions are 3.44 (87.3 mm) diameter x 2.44 (62 mm) depth, and it has a standard 1 3/8 - 18 horn coupling thread. Net weight is 2 lbs., and shipping weight is 2 lbs. 4 oz.

Using the Peavey DX 14 High - Frequency Driver is easy. First, make sure your audio system is turned off. Then, carefully remove the old driver from the Peavey DM 112 or DM 115 enclosure and replace it with the DX 14. When connecting, ensure proper wiring according to the system's requirements. For best results, set the crossover frequency around 2000 Hz at 12 dB / Octave, but you can go as low as 1500 Hz. During use, avoid exposing the driver to excessive moisture or dust. If it gets dirty, use a soft, dry cloth to gently clean the surface. Also, don't subject it to high - power levels for extended periods to prevent overheating. When storing, keep it in a cool, dry place away from direct sunlight.