Product Description
The Chief PAC526FBP6 is a game - changer for flat - panel installations. It offers an organized, recessed area to neatly route excess cables. The flange not only gives it an aesthetically trimmed look but also enables drywall mounting. This storage box comes with a high - performance, dual - gang housing and an isolated ground. The 6 - receptacle outlet features non - sacrificial multi - stage filtration and surge protection, safeguarding your equipment from high - frequency noise and power - related damage. It's compatible with a wide range of wall mounts like PST, PRO, PLP, etc. Key features include pre and post - construction installation options, drywall and stud mountability, knockouts for various outlets and conduits, integrated universal zip - tie anchor points, both landscape and portrait installation capabilities, the ability to store a large variety of AV components, a paintable flange for any environment, and it's UL 2416 listed for AV, IT, and communication technology equipment installation. Technical specs: Certified UL Listed, in black color. Output is 15A, 1875W continuous. Overall dimensions are 15.51 x 15.4 x 3.88 inches (394 x 391 x 98 mm). Power consumption is less than 0.5 watt, with Type 3 Surge Protective Device. Voltage protection ratings are 600V L - N, N - G; 800V L - G, maximum continuous operating voltage is 240V, nominal discharge current is 3kA, short - circuit current rating is 5kA, and the ambient temperature max is 40 degrees C. Weight capacity is 10 lbs.
Using the Chief PAC526FBP6 is quite straightforward. First, decide whether you're doing pre - construction or post - construction installation. If you're mounting on drywall or a stud, make sure the surface is flat and clean. You can use the knockouts for single - gang outlets or conduits to route your cables. For organizing cables, use the integrated zip - tie anchor points. You can install it in either landscape or portrait orientation according to your needs. When placing AV components inside, make sure not to exceed the 10 - lb weight capacity. As for maintenance, keep the box clean and free of dust. Check the surge protection regularly, especially after power disturbances. Avoid exposing it to temperatures above 40 degrees C. If you need to paint the flange to match your environment, use a suitable paint.
