TOA Electronics PC-2360 6 Inch Ceiling Mount Speaker, White

The TOA Electronics PC-2360 is a 6-inch white ceiling mount speaker. It has an all-metallic construction, making it perfect for voice alarm or BGM systems. The spring clamp mechanism allows for easy ceiling installation. You can effortlessly change the input impedance by adjusting the transformer's tap position. The push-in type input terminal block simplifies cable connection and supports bridge wiring. Technical specs include a rated input of 6 W (100 V line) and 3 W (70 V line), with various impedance options. It has a sensitivity of 94 dB (1 W, 1 m) in the 500 Hz - 5 kHz range, a frequency response from 60 Hz - 20 kHz, and a 16 cm cone-type speaker component. It operates in temperatures from -10 C to +50 C, and has specific dimensions for mounting and ceiling thickness. The speaker uses a spring clamp for mounting, and is compatible with solid wires from 0.5 - 3 mm. It features a push wire connection with a bridging terminal-2 branch type. The frame and grille are made of steel, painted white (equivalent to RAL 9016). It measures 230 - 76 (D) mm and weighs 740 g, with a paper pattern as an accessory.

Using the TOA Electronics PC - 2360 speaker is easy. First, find a suitable ceiling location. The spring clamp mechanism makes it simple to mount the speaker to the ceiling. Just use the provided paper pattern to mark the holes accurately. When it comes to wiring, the push - in type input terminal block allows you to connect the cables without any hassle. You can even use bridge wiring if needed. To adjust the input impedance, just change the tap position of the transformer according to your needs. For the cables, make sure to use solid wires with a thickness between 0.5 - 3 mm. As for the temperature, this speaker can work well in environments from -10 C to +50 C. So, don't place it in extremely hot or cold areas. When it comes to maintenance, keep the speaker clean. You can gently wipe the frame and grille with a soft, dry cloth. Avoid getting the speaker wet, as this could damage its internal components. If you have any issues, check the connections first and make sure the transformer tap is set correctly.