Reloop TURN-5 High-Performance Direct Drive Hi-Fi Turntable System
Direct Drive & HiFi Excellence
Reloop HiFi presents the TURN5, a quartz-controlled direct-drive turntable that offers top-notch sound. Our expertise has led to the creation of this new HiFi turntable, which stands out in its class for its technical finesse.
Powerful Motor & Low-Resonance Design
The brushless direct-drive DC motor provides a powerful and consistent rotation. The TURN5 is made using die-cast precision techniques. A rubber base dampens unwanted resonance, and a 5 mm rubber coating protects against vibrations, ensuring exceptional sound reproduction.
Quality Controls & Connections
You can easily select three motor speeds - 33 1/3, 45, or 78 rpm - with controls on the top. This means the TURN5 can play old shellac records with a mono-system (not included). There's a large start/stop knob. The tonearm's universal locking mechanism allows for quick headshell exchanges. With the supplied counterweight, a variety of cartridges can be used. The rear panel has gold-plated phono outputs (RCA) with a separate earth connection to prevent interference. The cable terminals are recessed for protection, and the power and RCA cables are removable.
Balanced Tone Arm & Hi-tech Cartridge
The TURN5 features a statically balanced S-shaped tone arm. It comes with a hydraulic lift, anti-skating setting, and convenient tone arm height adjustment. This ensures optimal cartridge performance and accurate recording reproduction. The pre-mounted Ortofon 2M Red cartridge has an elliptical cut for great sound quality.
Elegant & Durable Design
The housing has a heavy-duty metal construction with shock-absorbing feet to reduce vibrations and ambient noise. The combination of materials adds stiffness. With its deep black piano finish, the TURN5 looks elegant and timeless. The gold-plated turntable draws attention to the record.
Key Features
- Quartz-Controlled HiFi turntable with high torque
- Brushless Direct Drive DC Motor
- Precision-machined Die-Cast Aluminium Turntable Platter for balanced rotation
- Rubber covering for resonance control and damping
- Static-balanced S-shaped tonearm with VTA adjustment
- Adjustable anti-skating dial for better cartridge tracking
- Pre-installed Ortofon 2M Red cartridge
- Integrated motor control for speed selection (33, 45, 78 RPM)
- Universal Headshell Connector for flexibility
- High-quality Phono outputs with separate grounding
- Gold-plated, corrosion-resistant audio outputs (detachable cables)
- Protected cable terminals
- Heavy metal construction, rigid cabinet, and shock-resistant feet
- Counterweight for various cartridges
- Elegant design with black Piano Finish and gold anodised Platter
- Included Accessories: Turntable Platter, Dust Cover, Hinges, Balance Weight, PHONO RCA Cable, Power Cord, Rubber Mat, Manual, Cartridge & Headshell
Technical Specifications
Turntable Section
Type: Direct Drive Manual Turntable System
Drive: Quartz-driven high-torque direct drive
Motor: 16-pole, 3-phase, brushless DC motor
Speeds: 3 manual speeds (33 1/3, 45, 78 rpm)
Starting Torque: 4500 g/cm
Start-up time / rpm change: < 0.2 sec.
Wow and flutter: 0.01% WRMS
S/N Ratio: > 55 dB (DIN-B)
Brake system: electronic brake
Recommended record weight: 800g
Turntable Platter
Material: aluminium die-cast
Diameter: 332 mm
Weight: ~1.8 kg (incl. rubber mat)
Tonearm Section
Type: Universal Static Balanced S-Shaped
Effective Length: 230 mm
Overhang: 15 mm
Tracking Error Angle: < 3 degrees
Offset Angle: 22
Stylus Pressure: 0 - 4 g
Adjustable Tonearm Base (VTA): 0 - 6 mm
Applicable Cartridge Weight: 3.5 - 8.5 g (13 - 18 g incl. headshell)
Anti-Skating Range: 0 - 3 g
Effective tonearm mass: 20 g (incl. headshell)
Terminals
1x PHONO Out (gold-plated), 1x GND Earth Terminal
General
Power supply: AC 115/230 V, 60/50 Hz (EU/US), AC 100 V, 50/60 Hz (JP)
Power Consumption: 9 W
Dimensions: 458 (W) x 368.3 (D) x 162.4 (H) mm
Weight: ~12.8 kg
Included Accessories
Turntable Platter, Dust Cover, Hinges, Balance Weight, PHONO RCA Cable, Power Cord, Rubber Mat, Manual, Cartridge & Headshell
Using the Reloop TURN-5 turntable is easy. First, connect the power cord to a suitable power source, making sure to match the voltage as per your region. Then, attach the PHONO RCA cable to your amplifier or receiver and use the earth lead to prevent interference. Place a record on the turntable platter and use the tonearm to gently lower the stylus onto the record. You can select the speed (33 1/3, 45, or 78 rpm) using the controls on the top. For best results, adjust the anti-skating dial according to the record's weight. When not in use, cover the turntable with the dust cover to protect it. Be careful when handling the tonearm and the cartridge, as they are delicate parts. Keep the turntable on a stable surface to avoid vibrations. Clean the platter and the stylus regularly. Use a soft, dry cloth to clean the platter, and a stylus brush to clean the stylus. If you need to replace the cartridge, use the universal locking mechanism on the tonearm for an easy exchange. Also, remember to balance the tonearm properly using the counterweight for accurate tracking.
