Qolsys IQ Glass-S Glass Break Sensor

The Qolsys IQ Glass-S is a top - notch wireless glass break detector crafted to secure your home. It leverages advanced S - Line technology to encrypt signals sent to your IQ Panel, offering high - level security and blocking interference. It's also backward - compatible with legacy 319.5 MHz systems, making it easy to integrate into your current security setup. With 24/7 break - in detection, the IQ Glass - S gives you peace of mind. It listens for the unique frequencies of breaking glass and sets off an alarm right away in 'Stay' or 'Away' mode, so you're protected whether you're home or out. For the best detection, the Qolsys IQ Glass - S offers flexible placement. You can mount it on the wall opposite windows or on the ceiling in multi - window rooms. It has a 20 - foot protection range, effectively safeguarding most rooms. Upgrade your home security now with the Qolsys IQ Glass - S and rest easy knowing your windows are well - protected. **Key Features** - Uses encrypted S - Line sensor technology to protect signals to the IQ Panel and is compatible with old 319.5 systems. - Monitors for breaking glass frequencies in 'stay' or 'away' modes. - Usually installed on the wall facing protected windows or on the ceiling in rooms with many windows. - Protects windows within a 20 - foot line of sight. **Technical Specifications** - **Sensor**: 2.75”H x 3.88”W x 1.5”D - **Compatible control panels**: Qolsys IQ Panel 2 - **Frequency**: 319.5MHz - **Battery**: 3V GP CR123A (x2) - **Operating Temperature**: 14°F to 122°F - **Detection Range**: 20ft Max and 5ft Min - **Intended for use with IQ Panel 2** - **Supervisory signal interval**: 70 min (approx.) - **Intended for use with 3/16” and 1/4” plate or tempered glass

Using the Qolsys IQ Glass - S is easy. First, decide where to place it. You can put it on the wall facing the windows you want to protect or on the ceiling in a room with windows on multiple sides. Make sure it's within the 20 - foot detection range of the windows. When you're setting up your security system, pair the sensor with your Qolsys IQ Panel 2. It's compatible with legacy 319.5 MHz systems too, so if you have an older setup, it should work seamlessly. Once it's installed and paired, turn on your security system to 'Stay' or 'Away' mode. The sensor will start monitoring for the frequencies of breaking glass. If it detects any, it'll trigger an alarm right away. Here are some things to keep in mind. The sensor works best with 3/16” and 1/4” plate or tempered glass. It operates between 14°F and 122°F, so don't install it in areas that get too hot or cold. For maintenance, change the two 3V GP CR123A batteries every so often. The sensor sends a supervisory signal about every 70 minutes. If you don't receive this signal, it might be time to check the batteries or the connection to the panel.