Product Description
The Platinum Tools 202044J ezEX44 ezEX - RJ45 Connectors come in a pack of 100. These connectors are specially designed for larger cables and conductors. They feature a unique integrated Hi - Lo stagger load bar, which enables larger conductors to easily pass through the front end of the connector. This makes it a breeze to verify the wiring sequence before termination. Usually used with Cat6 cables, they can be terminated with an EXO Crimp Frame and EXO - EX Die (PLAT - 100061C). In modern networks, twisted - pair cables need more speed and bandwidth. To meet these needs, Cat5e/6/6A cables have grown in size. Cable and connector compatibility is a challenge due to variations in outer diameter and conductor insulation diameter among manufacturers. The patented ezEX - RJ45 Termination System is the answer, offering better cable - to - connector compatibility for higher performance. Key features include a simple one - piece/pass - through design without bars or liners, Hi - Lo stagger for isolating each conductor for better performance, compliance with 5e/6/6A standards, an insulation diameter range of.039” to.044” (1.0 - 1.12mm), a maximum outer diameter of.290” (7.36mm), a rating up to 10 Gigabit for top - notch performance, compatibility with solid or stranded conductors from 24 - 22 AWG, and compliance with FCC, RoHS 2, and UL standards. These connectors are proudly made in the USA.
Using these Platinum Tools ezEX44 ezEX - RJ45 Connectors is quite straightforward. First, select a cable that fits the size requirements - the insulation diameter of the conductor should be between.039” and.044” (1.0 - 1.12mm), and the maximum outer diameter should be.290” (7.36mm). Pass the larger conductors through the front end of the connector using the unique Hi - Lo stagger load bar. Before terminating, double - check the wiring sequence to ensure everything is correct. For termination, use an EXO Crimp Frame and EXO - EX Die (PLAT - 100061C). When handling these connectors, make sure to keep them in a dry and clean environment to avoid damage. Since they are made of high - quality materials, normal use won't cause many issues. But if you notice any signs of wear or damage, it's best to replace them. Also, keep in mind that these connectors are compliant with FCC, RoHS 2, and UL standards, so you can use them with confidence in your network setup.
