LYNN AV & Security Techlogix Networx TL-3STRIP Fiber Optic 3-Hole Jacket/Coating Stripper

The TechLogix TL-3STRIP is a top - notch professional tool for prepping fiber optic cables for connector termination. It has three precisely - sized holes, perfect for various types of fiber optic cables, whether multimode or single - mode, from almost any manufacturer. The biggest hole is great for stripping the 1.6 - 3mm fiber jacket down to the 600 - 900 micron buffer. The middle one works wonders for taking the 600 - 900 micron buffer down to the 250 micron coating. And the smallest hole is ideal for getting the 250 micron coating off to reach the 125 micron glass or polymer fiber. Made of high - quality steel, it features stylish yellow plastic grips that are as cool as a Ferrari for your fingers. It comes with a serrated blade, a safety lock, and a spring design. This three - hole construction tool is a must - have for every fiber installer.

Using the TechLogix TL - 3STRIP is easy. First, pick the right hole according to the fiber optic cable you're working on. If you have a 1.6 - 3mm fiber jacket, use the largest hole to strip it down to the 600 - 900 micron buffer. For the 600 - 900 micron buffer, the middle hole will help you reach the 250 micron coating. And for the 250 micron coating, use the smallest hole to get to the 125 micron glass or polymer fiber. When using the tool, make sure to engage the safety lock to prevent any accidental cuts. The spring design helps with smooth operation, so just apply a bit of pressure and pull the tool along the cable. As for maintenance, keep the serrated blade clean after each use. You can use a soft cloth to wipe off any debris. Store it in a dry place to prevent rusting. With proper use and care, this tool will serve you well for a long time.