Lowell ACS-1505-SW-SD Power Strip-15A, 5 Outlets, 6ft Cord, 2-Stage Surge Supp, Switch

The Lowell ACS-1505-SW-SD power strip is a great choice for your power needs. It comes with five 15A NEMA outlets, which are well - spaced for power supplies. There's an easy - to - use on/off rocker switch with an integral circuit breaker. Measuring 12”L x 2”H x 2”D, it's ETL Listed to UL standard 60065. You can mount it at the rear of a rack or on wall/shelf surfaces using the provided universal mounting brackets. The power strip has a detachable 6 - foot IEC cord with a NEMA 5 - 15P plug. Its steel chassis has a sleek black powder epoxy finish. And it features two - stage surge/transient suppression with LED status indicators, ensuring your devices are protected. With a power rating of 120VAC, 60 Hz, 15A, it's reliable and efficient.

Using the Lowell ACS - 1505 - SW - SD power strip is easy. First, make sure the on/off switch is off. Plug the NEMA 5 - 15P plug of the detachable 6 - foot cord into a power outlet. Then, you can plug your devices into the five 15A NEMA outlets. Flip the on/off rocker switch to turn on the power strip and start using your devices. When it comes to safety, don't overload the power strip. The total amperage of the devices you plug in should not exceed 15A. If the circuit breaker trips, turn off the power strip, unplug some devices, and then reset the breaker. For maintenance, keep the power strip clean. You can use a dry cloth to wipe the surface. Check the LED status indicators regularly. If they show an abnormal status, it might indicate a problem with the surge suppression. Store the power strip in a dry and cool place when not in use.