DBX ZC-9 8-Position Rotary Source Selector for ZonePro

The DBX ZC-9 8-Position Rotary Source Selector is a great addition to the DriveRack and ZonePRO families. Zone Controllers expand the utility of these systems. They use analog DC voltage for logic control, covering zone source selection, volume adjustment, muting, program or scene selection, and fire safety muting. Wired with common and affordable CAT5 cable using rj-45 connectors, it can reach up to 1000 ft, offering simple and elegant solutions for contractors. Key features include computer - programmable push - button up/down volume control for dbx ZonePRO devices, DIP switches for identification via CAT 5 cable on RJ - 45 connectors, and it's a reliable dbx ZC - 9 remote controller. Technical specs: It has (2) RJ - 45 connectors. Series wiring cable length varies with the number of Zone Controllers. For parallel wiring using ZC - BOB, it can connect up to six Zone Controllers at 1000 ft. Use CAT5 or CAT5E cable with specific electrical ratings. It's certified by UL 60065, IEC 60065, EN 55013, E60065. All information may change without notice. Recommended for installations.

Using the DBX ZC - 9 is easy. First, connect it to your ZonePRO device with the CAT5 cable using the RJ - 45 connectors. You can then use the push - buttons for volume control. The DIP switches help in identifying the device when connected via the CAT5 cable. When wiring, pay attention to the cable length limits. For series wiring, the maximum length depends on the number of Zone Controllers. For parallel wiring using the ZC - BOB, you can connect up to six controllers at a 1000 - ft distance. Always use the recommended CAT5 or CAT5E cable. Keep in mind that all the product information might change without notice. For maintenance, keep the device clean and free from dust. Check the connectors regularly for any signs of wear or damage. Also, make sure it's installed in a safe environment according to the safety agency certifications.