Crestron UCA-SMK-UC2 Swivel Mount for Flex Tabletop Small Room Conference System

The Crestron UCA-SMK-UC2 is an excellent low-profile swivel mount accessory designed for Crestron Flex Tabletop Small Room Conference Systems (UC-MM30-T, UC-MM30-TA, and UC-MM30-Z series). It allows you to permanently attach the device to a tabletop while enabling a rotation of up to 170° for the best positioning. This swivel mount can be installed on any flat and level surface with a thickness ranging from 1/2 in. (13 mm) to 1-1/4 in. (32 mm). The wiring is routed through the center of the mount and passes beneath the surface, giving it a completely hidden look. Technical Specifications: Swivel Range - 170° total (-85° and +85°); Construction - Made of black polycarbonate-ABS; Mounting - Tabletop mount fastened by a locking nut, with a surface thickness requirement of 1/2 in. (13 mm) to 1-1/4 in. (32 mm) and a 4 in. (102 mm) diameter mounting hole cutout (template included); Dimensions vary depending on whether the UC-2 is mounted or not.

Using the Crestron UCA-SMK-UC2 swivel mount is easy. First, make sure your tabletop is flat and has a thickness between 1/2 in. (13 mm) and 1-1/4 in. (32 mm). Cut a 4 in. (102 mm) diameter hole in the table using the provided template. Then, attach the mount to the table with the locking nut. Next, install your Crestron Flex Tabletop device on the mount. You can rotate it up to 170° to find the best viewing angle. When routing the wiring, pass it through the center of the mount and under the table surface for a clean look. As for maintenance, keep the mount clean by wiping it with a soft, dry cloth. Avoid using harsh chemicals that could damage the black polycarbonate-ABS material. If you notice any issues with the rotation or the locking mechanism, check the parts for tightness and contact Crestron support if needed.