The Crestron TSW-770-MSMK-B-S Multisurface Mount Kit in black is a great solution for your TSW-770 or TSS-770 series touch screen. It allows you to flush mount the touch screen on glass walls or other smooth, flat surfaces. This makes it perfect for mounting at the entrance of meeting spaces for room scheduling. Key features include the ability to mount on virtually any flat and smooth surface, support for glass and partition mounting, compatibility with the TSW-770-LB light bar to show room availability clearly. It has a secure, screwless installation with a peel-and-stick adhesive rear housing. It also comes with an assortment of raceways to hide wiring and a rotatable plastic cover to conceal unused cutouts. Available in sleek black or white finish. Technical specs: The housing is made of plastic with a black or white finish. It uses peel-and-stick adhesive for surface mounting on glass or other flat surfaces. The raceway is a peel-and-stick adhesive mount plastic one, white (paintable), with a 0.77 in. W x 0.46 in. D (19.6 mm W x 11.7 mm D) profile, including 3 straight sections, 2 straight couplers, 2 90° flat elbows, 1 inside elbow, and 1 outside elbow. Dimensions without the touch screen are 3.93 in. (100 mm) in height, 5.97 in. (152 mm) in width, and 2.01 in. (51 mm) in depth. With the touch screen installed, it's 4.17 in. (106 mm) in height, 6.80 in. (173 mm) in width, and 2.57 in. (65 mm) in depth. It weighs 3.6 oz (102 g) without the touch screen, light bar, or raceway.
Using this Crestron mount kit is easy. First, choose a smooth, flat surface like a glass wall at the entrance of a meeting room. Clean the surface thoroughly to ensure good adhesion. Then, use the peel-and-stick adhesive on the rear housing to attach the mount to the surface. Next, install the TSW-770 or TSS-770 series touch screen onto the mount. You can use the included raceways to neatly hide the wiring. If there are any unused cutouts, use the rotatable plastic cover to conceal them. When it comes to maintenance, regularly check the adhesive to make sure the mount is still securely attached. If the surface gets dirty, gently clean it with a soft, dry cloth. Avoid using harsh chemicals as they might damage the plastic housing or the adhesive. Also, be careful when handling the light bar and the touch screen to prevent any scratches or damages.
