The Cloud Electronics VA2120 2U two-channel power amplifier is a budget-friendly audio solution for all kinds of commercial spaces. It's designed to be super easy to install and operate. This 2-channel amplifier can pump out 120 watts per channel. It can directly drive low-impedance speakers (minimum 4 ohms) or work with 25/70/100V line speaker distribution systems. Key features include: 120W per-channel power output, outputs for low-impedance or 25/70/100V line systems, balanced inputs with gain preset controls per channel, a 65 Hz high-pass filter per channel for 25/70/100V line systems, a per-channel limiter to prevent clipping, over-temperature and output DC protection, operation on 230V or 115V, and forced-air cooling.
Using the Cloud Electronics VA2120 power amplifier is a breeze. First, decide whether you'll connect low - impedance speakers or use a 25/70/100V line speaker system. Connect your speakers according to the impedance requirements. For low - impedance speakers, make sure they have a minimum of 4 ohms. Adjust the per - channel gain preset controls on the balanced inputs to get the right sound level. The 65 Hz high - pass filter on each channel can be used when you're working with 25/70/100V line systems. Be aware that the per - channel limiter is there to stop clipping, so you don't have to worry about over - driving the amplifier. You can choose to operate it on either 230V or 115V, just pick the voltage that suits your location. As for maintenance, keep an eye on the forced - air cooling system. Make sure the vents are clear of dust and debris to prevent over - heating. Also, the over - temperature and output DC protection are in place to safeguard the amplifier, but if you notice any strange behavior, it's a good idea to check the connections and power source.
