The Cloud CS-C8W is an 8-inch white coaxial two-way in-ceiling speaker that stands out with its great intelligibility and musical performance. It uses top - notch drivers and electronics, offering high sensitivity, a smooth frequency response, and excellent off - axis performance. All models come with ZeroEdge™ magnetic grilles. When removed, you can easily access high or low impedance switch settings for distributed audio systems. Designed in the USA by a specialist speaker design team for Cloud Electronics, the CS - C Series speakers are installer - friendly and acoustically tuned to match Cloud's amplifiers and mixer amplifiers. These speakers are built for quality, designed and tested to a high standard by caring engineers, and come with a comprehensive 5 - year commercial warranty. Key features include an 8' woofer, a 1' soft dome tweeter, multiple power options at 100V (64W, 32W, 16W, 8W) and 75W at 16Ω. It has a nominal SPL of 90dB and a max SPL of 111dB. The magnetic ZeroEdge™ speaker grilles have an 11.39' diameter, and there's an accessible impedance switch. You can remove the logos for discrete use. It's available in black or white, and there's an optional Tile Bridge. Technical specs: It's an 8” 2 - way in - ceiling speaker with a magnetic grille and steel back can. The frequency response ranges from 64 Hz - 20 kHz, with an impedance of 16 ohm. It has a sensitivity of 92 dB at 1 W/1 m and can handle 75 W of power. The transformer has taps at 64, 32, 16, 8, 4 W. The tweeter is a 1 - inch silk dome with a phase plug, and the woofer is an 8 - inch treated paper with a rubber surround. It comes with an input cover plate and a male Euroblock, and there's an optional tile bridge. It's packaged one per box with cardboard inner packaging and a single instruction sheet, and it's planned to conform to UL1480 / 2043, and is RoHS and CE approved.
Using the Cloud CS - C8W in - ceiling speaker is easy. First, choose the right impedance setting according to your audio system by removing the ZeroEdge™ magnetic grille and accessing the switch. Then, connect the speaker to your amplifier using the 4 - pin Euroblock input. You can install it in the ceiling as per the instructions in the package. For the best sound, make sure it's properly installed and tuned to match your Cloud amplifier or mixer amplifier. When it comes to maintenance, keep the speaker clean by gently wiping the grille and the body with a soft, dry cloth. Avoid using harsh chemicals as they might damage the speaker. Also, don't expose the speaker to excessive moisture or extreme temperatures. If you want to use it in a tiled ceiling, you can use the optional Tile Bridge. If you encounter any problems, refer to the instruction sheet or contact the Cloud Electronics support team. Remember, this speaker comes with a 5 - year commercial warranty, so you can use it with confidence.
