Product Description
The Bosch DCNM-WAP is a top - notch wireless access point. It offers stand - alone usage, eliminating the need for a central control unit. Built on the IEEE 802.11n standard WiFi, it provides a reliable connection. With WPA2 encryption, your communication is kept secure. It can seamlessly switch frequencies in the 2.4 GHz and 5 GHz bands. You have multiple powering options, including a power supply adapter, Power over Ethernet (POE), or the DICENTIS multimedia System Network Cable. Technical specs include a supply voltage range of 100 - 240 Vac 50 - 60 Hz in and 48 Vdc out. It supports various PoE standards and has a power consumption of 10 W. It has a great frequency response from 80 Hz - 20 kHz, low THD at nominal level (<0.1 %), high dynamic range (>98 dBA), and good signal - to - noise ratio (>96 dBA). The Ethernet is 1000Base - T IEEE 802.3ab. It can be mounted on the ceiling, wall, or a tripod floor stand using the included bracket. Its dimensions with the bracket are 285 x 202 x 65 mm (11.2 x 8.0 x 2.6 in) and it comes in a light grey color (RAL 000 7500). It can operate in temperatures from 5 deg C to +45 deg C (41 deg F to +113 deg F) and be stored/transported between - 20 deg C to +70 deg C (-4 deg F to +158 deg F) with relative humidity between 5% and 95%.
Using the Bosch DCNM - WAP wireless access point is easy. First, choose your preferred powering option: you can use a power supply adapter, Power over Ethernet (POE), or connect it to the DICENTIS multimedia System Network Cable. Then, mount it on the ceiling, wall, or use the included bracket on a tripod floor stand. When it's powered on, devices in the area can connect to it just like any other WiFi network. Make sure your devices support the IEEE 802.11n standard for the best connection. For security, the WPA2 encryption will keep your data safe, so you don't have to worry about unauthorized access. As for maintenance, keep it in a clean environment. Avoid exposing it to extreme temperatures outside the operating range of 5 deg C to +45 deg C (41 deg F to +113 deg F). Also, don't let the relative humidity go below 5% or above 95%. If you need to store it, make sure the temperature is between - 20 deg C to +70 deg C (-4 deg F to +158 deg F). Periodically check the power connections to ensure a stable performance.