SurgeX SEQ-1U 8 Receptacle Sequencing Surge Protector and Power Conditioning Device, 1RU, 120V/20A
When you need to power up or down electronic equipment in a specific order instead of all at once, sequencing is crucial. In AV systems, proper sequencing helps control power distribution, preventing annoying pops and hissing sounds. It also guards against excessive inrush surge currents that could trip circuits.
Key Features
- Three sets of four sequenced receptacles and two always-on receptacles
- Setup saved in non-volatile memory
- Ability to control other SurgeX products or connect in a daisy-chain with other SEQ sequencers
- Comes with an LCD screen
- Magnetic shielding steel enclosure for protection
- 9-foot grounded 3-wire cord
Technical Specifications
Plug Config.
20A/120V
Outlet Config.
8 Outlets 5-15R (x6) 5-20R (x2)
Rack Size
1 RU
Using the SurgeX SEQ-1U is easy. First, connect the 9 - foot grounded 3 - wire cord to a suitable power source. Then, plug your electronic devices into the receptacles. You can use the three sets of four sequenced receptacles when you need to power your devices in a specific order, and the two always - on receptacles for devices that need continuous power. If you want to control other SurgeX products or connect multiple SEQ sequencers, you can do so as described in the features. When setting up the device, don't worry about losing your configuration as it's stored in non - volatile memory. As for maintenance, keep the device in a dry and cool place. Wipe the magnetic shielding steel enclosure regularly to prevent dust buildup. And always check the LCD screen for any error messages or important information. Be careful not to overload the device with more power than its 20A/120V rating.
