Qolsys IQ Carbon Monoxide Detector with 319.5 MHz Radio

The Qolsys IQ Carbon Monoxide Detector with 319.5 MHz Radio is a must - have for your home. It seamlessly connects with your IQ Panel, providing continuous carbon monoxide monitoring, even when your security system is off. This safeguards your family from the invisible yet deadly threat of carbon monoxide, which can come from common gas appliances like stoves, furnaces, and water heaters. With 24/7 monitoring, you get peace of mind. In case of a CO leak, the detector's loud built - in alarm and panel notification will alert you right away. It also triggers the IQ Panel's 'fire' tone and sends an alert to your monitoring station for quick emergency help. The dedicated test button makes it easy to check if the detector is working properly. Ideal for households at high risk of CO leaks, this detector offers top - notch protection. **Key Features** - Great for homes with a higher risk of carbon monoxide leaks from appliances. - Continuous 24/7 monitoring of carbon monoxide gas. - Test button to verify device functionality. - Built - in alarm in addition to the panel siren. - Triggers the panel's 'fire' tone and notifies the monitoring station about CO presence. **Technical Specifications** - **Power Source**: One 3 - volt CR123A Panasonic Lithium Battery (included) - **Audible Signal (temp 4 tone)**: 85 dBA min. in alarm (at 10ft (3m)) - **Operating Current**: 10 μA - **Temperature Range**: 40°F (4.4°C) to 100°F (37.8°C) - **Operating Humidity Range**: 15% to 95% Relative Humidity, non - condensing - **Pending Agency Listings**: UL standard 2075, UL 2034 and CSA 6.19 - 01

Using the Qolsys IQ Carbon Monoxide Detector is easy. First, install the included 3 - volt CR123A Panasonic Lithium Battery. Then, place the detector in an area where carbon monoxide might be present, like near gas appliances. Once it's set up, it will start monitoring for carbon monoxide 24/7. Every once in a while, press the test button to make sure it's working. If the alarm goes off, quickly leave your home and call emergency services. As for maintenance, keep the detector clean and away from dust and moisture. Check the battery regularly and replace it when it's low. Make sure the detector is within the recommended temperature and humidity range (40°F to 100°F and 15% to 95% relative humidity). Don't cover the detector or block its sensors, as this can affect its performance.