Product Description
The Furman M4320-PRO is a top - notch 20A BlueBOLT power conditioner. It features eight fully controllable programmable outlets that can be managed via RS - 232C or BlueBOLT. With linear filtration and four isolated outlet banks, it offers great electrical protection. There are two front - panel programmable reboot buttons for easy operation. The removable rack ears, included with a full - depth metal chassis, make installation a breeze. It comes with BlueBOLT IP system control and monitoring, and includes an RS232 communication card (not installed). The sleek new design has a volt/amp meter, outlet status and warning LEDs. It has a dedicated 20 AMP circuit breaker and power switch. Weighing 12 lbs, with dimensions of 19 x 12.25 x 1.75 in, it has 9 outlets and a total current capacity of 20A (2400W). It offers thermal fusing, protection modes of L - N, L - G, N - G, and can handle a peak impulse current of 135,000. With an initial clamping level of 200V Peak, 141V RMS, 2 high - current outlets, and energy dissipation of 2700 Joules, it's a reliable choice for your electrical needs.
Using the Furman M4320 - PRO is straightforward. First, make sure it's properly installed. You can use the removable rack ears for mounting. Connect your devices to the eight individually controllable outlets. You can manage these outlets via RS - 232C or BlueBOLT. If you need to reboot your connected devices, use the two front - panel programmable reboot buttons. Keep in mind that the device is designed for a 120VAC, 60Hz power supply. Don't exceed the total current capacity of 20A (2400W) to avoid overloading. For maintenance, check the thermal fusing regularly. The device has a circuit breaker and power switch, which can protect it from surges. Also, make sure to keep it in a dry and well - ventilated area. If you face any issues, you can refer to the BlueBOLT IP system control and monitoring to troubleshoot.
