Bosch DCNM-WD Wireless Discussion Device

The Bosch DCNM-WD is a top - notch wireless discussion device. It comes with a removable battery pack that's a breeze to change and charge. You can configure it as a participant, dual - use or chairperson device right through a web browser interface. And here's the great part: you can expand its functionality with software modules, no hardware modification needed! Technical specs include a 7.5 Vdc battery supply, 4.5 W power consumption, over 24 hours of operating time (20% speech, 80% listening), and a wide frequency response from 100 Hz - 20 kHz. It also has a high dynamic range and signal - to - noise ratio. With a tabletop mounting option, dimensions of 72 x 259 x 139 mm without the microphone, and a traffic black color, it's both practical and stylish. It operates in a temperature range of 5°C to 45°C and can be stored between - 20°C to 70°C.

Using the Bosch DCNM - WD wireless discussion device is simple. First, make sure the battery pack is fully charged. You can easily remove and recharge it when needed. To configure the device, use a web browser interface to set it as a participant, dual - use, or chairperson device according to your meeting requirements. When using it, place it on a tabletop. For audio, connect your headphones with an impedance between 32 ohms and 1k ohms. Keep in mind that the operating temperature should be between 5°C and 45°C. Avoid exposing it to extreme temperatures during storage and transport, which should be in the range of - 20°C to 70°C. Also, try to keep the relative humidity between 5% and 95%. To maintain the device, clean it regularly with a soft, dry cloth. If you want to expand its functionality, you can install software modules without having to change any hardware.